Lexmark Refill Instructions

13400/13619/12A1970/12A1980/12A1990/15M0120/15M0125
15M2619E/17G0648/17G0050/17G0060

1000 1020 1100 2030 2050 2055 3000 3200 5000 5700
7000 7200 9000 Compaq ij600 F4250 F4270
P700 P903 P704 P705 P706 P707 P708 P3100
P3120 P3150 SF3000 SF3100 SF4000 SF4100
SF4200 SF4500 SF4700 SCX1100 SCX1150 X63
X70 X73 X80 X83 X84 X85 X125
Z12 Z22 Z32 Z41 Z42 Z43 Z44 Z45 Z50 Z51
Z52 Z53 Z54 Z80 Z82 Z700 Z703 Z705 Z708

Lexmark Black Cartridges

Using the screw provided enlarge the filling hole.

Assemble the needle and syringe and fill with ink.

Push the needle into the cartridge.

The Cartridge contains a sponge, so slight resistance will be felt.

Slowly inject the ink at the same time slowly withdraw the needle.

Do not reseal the filling hole.

Leave the cartridge to stand over night on a non absorbent surface.

Install the cartridge and run a cleaning/ priming cycle as per the printer instructions.

Lexmark Colour & Photo Cartridge

Carefully using a knife prise the lid from main body of the cartridge.

The sponge in the cartridge is now exposed.

Please check before filling that your colours correspond with the instructions.

Assemble the needle and syringe, place the needle into the ink inlet hole and push until slight resistance is felt.

Remove the needle from the cartridge, this will allow you to see a small amount of colour on the needle.

If the colours are different from those on the instructions supplied, then fill the chambers as per the appropriate colour sequence in your cartridge.

Assemble the needle and syringe and fill with the appropriate colour ink.

Insert the needle through the hole in the plastic into the sponge.

Slowly inject the ink, pulling back slightly as you inject, to expose the different parts of the sponge.

Make sure you do not over fill, as the colours may leak into the other sponge.

Replace the top and seal with sticky tape.

Leave the cartridge to stand overnight on a non-absorbent surface to ensure no leakage and to allow time for the ink to soak into the sponge.

Return the cartridge to the printer and run a cleaning/priming cycle as per the printer instructions.