HP Refill Instructions
HP 14 /C5011d/C5010d
Officejet cp 1160/7100/7110/7130/7140
Officejet d125/d135/d145/d150/d155
 
Empty cartridges left for more than 3 days do not always give a successful re-fill.
Change your cartridge after 5 re-fills, as print heads wear with use.
On the color cartridge the inks from left to right are, CYAN - MAGENTA - YELLOW
Please check before filling that your colours correspond with the instructions.
If the colours are different from those on the instructions supplied, then fill the chambers as per the appropriate colour sequence in your cartridge.
Seal the outlet holes (see above).
Assemble the needle and syringe and fill with 10ml of black ink.
The filling hole in located under the label
Insert the needle into the filling hole.
Note the cartridge contains a sponge so slight resistance will be felt.
Very slowly inject the ink into the filling hole, at the same time withdraw the needle.
Reseal the filling holes with strong adhesive tape.
Remove the tape from the outlet holes and return the cartridge to the printer.
Run a cleaning/priming cycle as per your printer instructions.
Repeat the procedure for each of the colour chambers.
Ensure you fill the chambers with the correct colour ink.
The colour chambers only hold 5ml of ink.
Black cartridge
Press and at the same time, then release.
On the keyboard, press in a fast sequence, 7, 8, 9.
When the prompt appears asking if you wan to override the ink level gauge, press 1 for yes or 2 for no.
Colour cartridge
Press and at the same time, then release.
On the keyboard, press in fast sequence, 4, 5, 6.
When the prompt appears asking if you wan to override the ink level gauge, press 1 for yes or 2 for no
HP CP1160
Black cartridge
Press and hold down the power button.
While holding down the power button:
Press the cancel button twelve times.
Press the resume button
Release the power button once.
Colour Cartridge.
Press and hold down the power button.
While holding down the power button ,
Press the cancel button twelve times
Press the resume button three times.
Release the power button.
|