Epson Refill Instructions

TO481 TO482 TO483 TO484 TO485 TO486

TO491 TO492 TO493 TO494 TO495 TO496

TO551 TO552 TO553 TO554

R200 R210 R220 R230 R240 R245 R300 R310 R320 R340 R350 R425

RX420 RX425 RX500 RX510 RX520RX600 RX620 RX630 RX640

All the above are chipped and therefore need resetting.

Empty cartridges left for more than 3 days do not always give a successful re-fill.

We do not recommend that you refill the original cartridges for the above (only the compatible ones). You will also need to reset the chip on the cartridges,for the printer to accept them after refilling.

Remove the cartridge from the printer.

The filling holes are located on the top of the cartridge under the label (see above).

Using the eye screw provided make a hole in the cartridge(see above).

Some cartridges have a ball bearing instead, in this case push the ball bearing into the cartridge.

Fill the syringe with the appropriate colour ink.

Push the needle into the filling hole, almost to the bottom of the cartridge.

Slowly inject the ink, whilst withdrawing the needle.

When ink starts to appear at the filling hole, stop.

Then draw a small amount of the ink out of the cartridge.

Do not reseal the filling holes.

Return the cartridges to the printer and run 1 -3 cleaning cycles as per your printer instructions.