Refilling Instructions for Dell 922,924,926,942,944,946,962,964,966

Black

Put the cartridge on some paper towels in an area where you can tolerate a spill.

Peal off the top label.Fill the syringe with of black ink.

Very S-L-O-W-L-Y inject ink into the hole closest to the copper strip. Any hole will actually do, they all go to the same sponge, but the first hole is closest to the printhead.

When finished, replace the top label or leave it off (it will make no difference in the printing).

Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.

Note: On some of the newer Dell cartridges the filling holes are very small and need to be drilled out larger so the syringe needle can enter the cartridges.

Colour & Photo

Put the cartridge on some paper towels in an area where you can tolerate a spill.

Peal off the top label. Fill the syringe with 7 ml. of colour ink.

Very S-L-O-W-L-Y inject ink into each chamber until the sponge full. A little ink might come out of the top when full, so cover up the other two holes while filling one

When finished, replace the top label or leave it off (it will make no difference in the printing).

Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.

Note: On some of the newer Dell cartridges the filling holes are very small and need to be drilled out larger so the syringe needle can enter the cartridges.

For best results, leave cartridge in printer for 8 hours after refilling so the ink can saturate the entire sponge. (Allows ink to flow to the printhead).                                             

Empty cartridges should be refilled immediately. Also this work is done best over the sink.