Canon BCI3e BCI6 Refill Instructions

       BJC3000,6000,6100,6200,6500,8200,i550,i560,i850,i865,i900d

     i905D,i950,i960,i965,i990,i6500,i9100,i9900,i9950,i9990
  ip3000,ip4000,ip4000R,ip5000,ip6000,ip8500,mp750,mp780
     S400,S450,S500,S520,S530,S600,S630,S700,S750,S800

     S820,S850,S900,S950,S4500,S5400,S6300,S8200,S9000
                       MPC400,MPC600F,MP700,MP730

Cover the outlet hole with the orange outlet seal that came with the cartridge (a rubber band will hold this in place) to prevent ink loss during refilling or with your finger over the outlet port while wearing latex gloves,strong tape or candlewax - any of these will do.

Push the Sealing Ball into the cartridge. If you can't see the ball just above the "push" then peel back the top label on the reservoir side of the cartridge to expose the Sealing Ball. This is the ball Canon used to plug up the hole after they refilled the cartridge.

Attach the needle to the syringe and fill with the correct color ink.

Slowly inject the ink into the filling hole until the chamber is almost full. Unused ink may be returned to the bottle.

Seal the hole using candlewax. If the hole isn't properly sealed the cartridge will leak.

Remove the orange outlet seal (or your finger) from the outlet hole.

Replace the cartridge and run 1 - 3 cleaning cycles as per printer instructions.