Canon BC01 BC02 BC05 Refill Instructions

BJ 5/10/20/100/130/200/210/230
BJC 150/210/240/250/255/1000/1010
FAX B 15/60/70/75/140/150/170/190/200/220

Using the screw provided remove the plug(s) from the filler hole(s).

Assemble the needle and syringe and fill with the appropriate colour ink.

Please check before filling that your colours correspond with the instructions.

Assemble the needle and syringe, place the needle into the ink inlet hole and push until slight resistance is felt. Remove the needle from the cartridge, this will allow you to see a small amount of colour on the needle. If the colours are different from those on the instructions supplied, then fill the chambers as per the appropriate colour sequence in your cartridge.

If the colours are different from those on the instructions supplied, then fill the chambers as per the appropriate colour sequence in your cartridge.

Cover the other holes not being filled to avoid any ink going into them.

Insert the needle into the appropriate colour, filling hole and push into the cartridge.

Important the cartridge contains a sponge, so slight resistance will be felt.

SLOWLY inject the ink and at the same time, slowly withdraw the  needle

When ink overflows then the cartridge is full. Wipe away any excess ink.

Repeat this process for all colours that need refilling.

Do not reseal the filler holes.

Leave the cartridge to stand over night on a non-absorbent surface to ensure no leakage and to allow time for the ink to soak into the sponge.

Install the cartridge and run a priming/cleaning cycle as  pre printer