Brother Refill Instructions

MFC 210 MFC 215 MFC 410 MFC 420 MFC 425 MFC 620
MFC 640 MFC 820 MFC 3240 MFC 3340 MFC 5440 MFC 5840
DCP 110 DCP 115 DCP 117 DCP 120 DCP 310 DCP 315 DCP 340
FAX 1835 FAX 1840 FAX 1940 FAX 2440

LC41 LC47 LC900

1. Put the cartridge on a newspaper or some paper towels in an area where you can tolerate a spill.

2. Turn the cartridge on its side and drill a hole 1/4 inch down from the black cap into the clear part of the plastic (see Photo)

3. Fill the syringe with 10 ml. of ink.

4. Insert the syringe through the drilled hole, If the needle hits the inner part of the cap then
aim the needle in a downward position as seen in the photo.

5. Slowly inject ink until you see the ink come up to just below the drilled hole.

6. Reseal the filling hole with tape.

7. Unused ink may be returned to the bottle.  Rinse the syringe with warm water and dry for future use.

8.Replace the cartridge(s) and run 1 - 3 cleaning cycles as per printer instructions.