Brother Refill Instructions

MFC 235C MFC 240C MFC 260C MFC 440CN MFC 465CN
MFC 660CN MFC 665CW MFC 680CN MFC 845CW
MFC 885CW MFC 3360C MFC 5460CN MFC 5860CN
DCP 130C DCP 135C DCP 150C DCP 153C DCP 157C DCP 330C
DCP 350C DCP 540CN DCP 560CN DCP 750CW DCP 770CW
FAX 1355 FAX 1360 FAX 1460 FAX 1560 FAX 1860
FAX 1960 FAX 2480C FAX 2580C

LC51 LC 57 LC 970 LC 1000

The cartridge sits in a case,which you will need to flip open like a book. Before you do this you will need to cut the label at the bottom as it is preventing the case from opening.

Flip open the cartridge casing (shell).

Remove the cartridge from the casing (shell).

There is a round hole (well) in the top of the cartridge. Inside the hole or well is a rubber stopper. Use a thumb drill and drill through the rubber stopper.
Note: Do not bump or press the "pressure release button".

Put the filling needle onto the syringe and fill the syringe with ink.

Insert the  needle through the drilled stopper hole and into the cartridge body. Be sure the needle (even though it is blunt) does not press up against the bag and punctures it.

S-l-o-w-l-y inject 10cc of ink into the cartridge bag.

Remove the syringe with needle and Seal the hole using the candlewax.