Lexmark 100A Refilling Instructions

These Refill Kits are for the '100A' not the 100 version which are a return programme or prebate cartridges & cannot be refilled.

S300,S305,S405,S505
S605,S815,Pro205,Pro703
Pro705,Pro706,Pro803,Pro805
Pro901,Pro903,Pro904,Pro905

Peel back the label & you will see the filling hole & the chip.

Don't touch the chip (copper area)

Fill the syringe with ink & push the needle at least half way down into the sponge & very slowly inject the ink into the sponge.

When finished do not cover the filling hole as this will be the air vent hole.

Replace the cartridge & run 1 - 3 cleaning cycles as per printer instructions.

For best results leave the cartridge in the printer for 8 hours after refilling so the ink can saturate the entire sponge.